Before you begin, you should determine whether the clogged basement floor drain is the cause of the problem. This could mean anything from a malfunctioning toilet or a backed up sewer to a clogged floor drain. If the water is coming from the floor drain, you’ll need to clear the debris that may be blocking it. If you can’t do this, call a plumber for assistance. If you’re unsure about the causes of the clogged basement floor drainage, you can try DIY methods.
Methods of Draining Water Basement
- To start, you’ll need to remove the cover from the floor drain and clear out any debris.
- Before you start pumping out water, you need to identify the cause. The cause of your problem could be plumbing leaks or water seepage.
- In either case, you must drain out the water as soon as possible.
- If your basement is flooded with water, you must first dry the basement and then use a dehumidifier to get rid of the moisture in the air. If you do not have a pump, you can hire a disaster mitigation specialist to pump out the water and clean it up.
- Once you have figured out which cause of your basement water, you need to determine what to do to solve it. There are many solutions that are available.
- The most common one is installing a French drain. It’s a perforated pipe that collects the water and pumps it to the surface. However, this method is not suitable for every homeowner. You need to dig a trench that is at least a foot deep and wide to install this system.
Process of Fixing Basement After Flood
The first step in the process of fixing a flooded basement is to identify the source of the problem. Look for the things that can cause mold like carpet, you need to extract water from it so that it wont smell bad. This is an essential step to prevent damage to your foundation by allowing the water to drain out of your basement. If the water is coming from a sewage line, you will need to make sure to stop pumping until the water level has decreased significantly. If your water is coming from a pipe, you can also hire a professional to perform the repairs and to evaluate the cost of basement water removal.
There are many methods to remove basement water. One of the most effective is to dig a hole and install a sump pump in your ejector pit. While this option is the simplest, most effective, and most affordable, it does not work for every homeowner. For this purpose, it is necessary to have a basement floor drain that connects to a sewer pit with an ejector pump. Regardless of the type of installation, it must be installed in the ejector pit of the basement.
How to Fix if your Basement Drain is Backed Up
If the basement drain is backed up, you need to fix the root of the problem first. If you’ve installed a laundry tub or wash basin in your basement, the issue may not be the drain itself but something further down the line. You can solve the problem quickly by cleaning the strainer that sits over the drain inlet. If the trap is clogged, you need to use a snake to open the trap.
In some cases, you need to install a sump pump to collect water that has accumulated in the basement. In addition to installing a water removal system, you need to consider the appearance of your basement. Some homeowners are concerned about the look of these pipes. In order to avoid this, you need to decide on the best material for your needs. If you don’t want your system to stand out, you can install a thin floor drain.