Are you having a hard time with your ceiling water damage problems? If so, then you should know that it is not an isolated incident. Many people have had ceiling water damage issues in their home or on their property. However, the good news is that you don’t have to continue suffering with this problem.
There are many things you can do to prevent this kind of ceiling water damage. You can get rid of the excess humidity in your house and make sure that the heating and cooling systems are working well. Also, you need to take care of the moisture accumulation inside the room where the ceiling water damage has taken place.
Tips on How to Get Rid of Mold
- Open all the windows and doors in your house. In addition to providing ventilation, this is also a great way to reduce the amount of humidity in your house. The ceiling water damage from heavy rains may have resulted to heavy amounts of humidity, which can have led to the growth of mold. It is important that you open all the windows and doors to let fresh air circulate. This will help alleviate the problem of mold.
- Make sure that you regularly clean the areas around your ceiling water damage. It is not enough to fix the damages if they have already grown. Molds need moisture in order to thrive. This means that the area where there is ceiling water damage must be cleaned at least twice a week. Cleaning the area will prevent the mold from growing. Also, this will keep small critters like cockroaches from getting inside and causing you more headaches.
- Always wear rubber gloves when dealing with ceiling water damage. Mold loves to grow on human skin. Therefore, make sure that your hands are well protected from the growth by wearing rubber gloves. This will help you prevent the molds from spreading. Besides, mold is one of the most common types of allergies and is the most difficult to fight against.
- You must also block the vents from the ceiling. Black mold loves to grow in areas where there is high level of heat and this also includes the vents in your ceiling. By obstructing the vents, you are preventing the mold from spreading. Not only does it prevent the mold from spreading but you can also prevent the toxins coming out from the mold. Aside from these two benefits, it also protects your personal health.
- Do not wait for any ceiling water damage to manifest before you do something. Wait until you notice mold growth instead. Once you find out that there is mold in your home, act immediately. Once mold has started growing inside your house, you will have bigger problem like dealing with the toxic mold. It is always better to prevent any problem rather than solving the problem after it has already manifested itself.
- Be careful when removing the ceiling water damage mold. Make sure that you wear rubber gloves so that you don’t get yourself exposed to the mold. And, keep a high level of ventilation in your home. By doing so, you can avoid having a bigger problem later on.
- Check the ceiling water damage mold thoroughly. Make sure that it is dry and you have removed all the mold that was growing inside your home. If you don’t see visible mold on it yet, wait for another day or two more. The more time you allow the mold to grow, the more dangerous it will become as the days goes by.
- If you think that your ceiling water damage is too much to handle on your own, call a professional for help. But, don’t let them scare you. There are specialists out there who know how to deal with this type of situation. With their help, you can be assured that the damage would be dealt with accordingly.
Why do Molds Starts on Roof or Ceiling
After your roof, the next biggest area for mold growth is on the inside walls. In these cases, you’ll probably need an expert. One of the best ways to avoid mold is to make sure the roof and floor are dry, clean, and free of moisture. This also means you can’t have moisture detectors in your home. Your best bet is to hire a reputable and licensed ceiling water damage repair contractor who uses the best cleaning, drying, and repair solutions available
As mentioned earlier, having drywall water damage is very serious. But, you don’t have to worry too much about it because you can still prevent it from getting worse. In fact, you have many ways to deal with it. So, if you are already feeling stressed out about the damages on your ceiling water system, you should consider hiring a reputable contractor to do the job for you. They will surely be able to make the ceiling water damage look like nothing more than an ordinary problem.
How to Detect Mold in a Ceiling
First of all, check for moisture content. Check for water stains, bubbling paint or gouges caused by water leaking onto wood floors. If mold has appeared on hardwood floors, remove them. If the damage is on the carpet, take it out and wash it under a faucet or with a steam cleaner. If there’s mold on wood floors, the best thing to do is call a mold remediation company.
Most mold problem starts at the roof. This means your entire roof needs to be inspected. Make sure it’s not stripped, and that no repair is needed. Mold can grow on almost any type of roof, even metal and fiberglass. All States have mandatory inspections, but an annual inspection is still a good idea. If there’s visible damage, you should contact a sagging ceiling repair specialist as soon as possible.